Water is
the Primary Cause of Blown
Pumps and Injectors in Diesel Engines
Water and
contaminants have a direct impact on the service life and
performance of diesel engines. Besides being abrasive to
engine components and cylinder walls, water and
contamination displaces diesel fuel's lubricative coating on
the high precision injector components, causing tolerance
erosion, surface pitting, fuel pressure loss and poor
performance.
Unfortunately,
there is no way to prevent water from contaminating fuel -
condensation is constantly forming inside fuel tanks.
Abrasive foreign matter is also being introduced constantly
through handling, storage and transportation of fuel.
What
about traditional fuel filters?
Factory filters
are a compromise at best. They must be porous enough to
allow full flow which limits filtration capacity to 10-30
microns - not nearly enough to protect your fuel system and
your engine. Traditional factory pleated paper filters
cannot completely remove the contaminants and hardly any of
the water, yet water is the primary cause of fuel pump and
injector failure.
Why
Perfect Filtration's Diesel Fuel Filters are Better
Perfect Filtration's Ultimate
Fuel Filters use a "depth type" absorbent filter media instead of
pleated paper, and can remove virtually all of the water and 99.9% of the
contaminants to less than 1 micron, including algae, silt and varnish to
name a few.
Perfect Filtration's
Ultimate Diesel Fuel Filters:
-
Clean
up to 100 gallons
per minute
depending on the
application (if you
need more flow let
us know and we'll
make it happen!).
-
Can
be mounted
horizontally or
vertically
-
Will
not affect, and are
not harmed by fuel
additives like
other filters
-
Hold
more water than
competitive filters
-
Differential
Pressure alerts
operator when to
change filter
-
Are
easy to service
-
And
come in a variety of
sizes (perfect
for use in vehicles,
to clean fuel
storage tanks, for
use in fuel
transport and other
applications)
Contact Us
About Perfect
Filtration!
|